• Easy to mix and apply

• Good flow characteristics

• Rapid strength development

• Increased adhesion

• Reduced shrinkage and cracking

• Increased abrasion resistance

• SikaLatex® KH is used as bonding agent and site-mix mortar admixture for the following applications:

  • Grouts and screeds

  • Patch repair mortars

  • Masonry mortars

  • Renders

  • Tile fixing

• External weather & UV resistant

• Easy to use and apply

• No priming

• Concrete sloped roofs (with membrane)

• Finishing

• Sealing joints, laps and roofing screws on various kind of roofs (roof tile, asbestos, zinc)

• Parapet walls

• External walls

• Non-shrink and prevent cracks

• Non-Sag / slump (thixotropic) application

• Consistent colour qualityFor filling the spaces of homogeneous tile, ceramic tile, marble, granite, mosaic, and natural stone, over a range of applications as below:

  • Floor and wall

  • Interior and exterior

  • Dry and wet area*

  * For dry area, mix Sika Tile Grout with water.

Easy to use with excellent workability and thixotropic consistency

• SikaCeram-188 KH can be applied on a vertical surface without sagging or letting the tiles slip, even when heavy tiles are used

• Very good adhesion to most common substrates (concrete, cementitious mortar, stone, bricks, etc.)

• Ceramic, porcelain, homogeneous tiles

• All type of low and high absorption tiles

• SikaCeram-188 KH can be used on substrates including: Concrete and mortar

• Bricks

• Tiled surfaces (walls and floors)

• Large size tiles

• Under floor heating

• Interior painted walls - if the paint coating is well bonded and sound

• Consistent quality.Better workability. Tile can be adjusted up to 20 minutes after application.

• Good adhesion to most common substrates (concrete, cementitious mortar, stone, bricks, etc)

• Soaking of tiles in water before installation is not required.

• Can be used with SikaLatex® to increase performance of adhesive.

• Saves time installation and material cost.

Sikadur®-31 CF Normal has the following advantages:

• Easy to mix and apply

• Very good adhesion to most construction materials

• High strength adhesive

• Movement capability of ± 25% (ASTM C 719)

• Good workability

• Good adhesion to many substrates

• Good behavior under limited water ponding

• UV resistant and resistant to yellowing and weathering

• Highly elastic and crack-bridging