Advanced Tank Lining Solutions for Reliable Protection

Thin film solvent based, chemically resistant epoxy

novolac tank lining

Suitable for the internal lining of storage and

process vessels in petrochemical plants at elevated

temperatures up to 130°C (268°F)

Suitable for the storage of hot water up to 95°C (203°F)

Resistant to sour crude oil/water mixture, and aromatic

and aliphatic solvents

Flexible cargo carriage

Efficient tank cleaning operations and

increased earnings

Suitable for the carriage of liquid foodstuffs

into the USA

Practical application scheduling

Cost effective application

Thin film, solvent based, chemically resistant epoxy phenolic tank lining

Suitable for hydrocarbon storage up to 55ºC

High solids formulation (76%) reduces solvent emissions

Recoatable up to 21 days. Greatly improves the scheduling of contracts

Fully resistant to oxygenated gasoline and all the additives such as MTBE, Ethanol, GTBE and other derivatives

Approved for use in contact with aviation fuel in accordance with Def Stan 80-97 as well as the additional requirements of a coating in section 3 of EI1541*

Interline 850 is certified to ANSI/NSF standard 61*

Solvent free, high build, amine cured epoxy tank lining

Certified to NSF/ANSI 61, BS6920, AS/NZS 4020 standards for the storage of potable water

Hard, glossy coating which provides a long-life, easy clean, low maintenance surface for safe, taint-free potable water storage

Provides additional resistance to a range of cargoes including potable water, crude oil and a variety of other hydrocarbons

100% solids, zero VOC formulation which eliminates solvent emission, explosion risk and fire hazard

Suitable for application as a single coat system, using standard airless spray equipment

Colour: Primrose

Gloss Level: Not applicable

Volume Solid: 30%

Thick film, solvent-free, low VOC epoxy phenolic tank lining

Resistant to crude oil up to 90°C (194°F), including sour crude • High build capability - ideal for maintenance of pitted substrates

Suitable for use as a single coat lining system or in conjunction with (Matcote®) glass fibre laminate system

Complies with immersion testing requirements of EI 1541 for aviation fuel storage

Recoatable up to 28 days for improved scheduling of contracts

Resistance to bio-fuels